HPRemailbanner1
HOME TRAILER
Trailer4
FAST
SAFER
AFFORDABLE
PRODUCT
PICTURES
VIDEOS
FAQ
NEWS
HISTORY
PRESS
TEST DRIVE
ORDER
ABOUT US
CONTACT
CALENDAR
RESULTS
TRACK INFO
LINKS
item4b
1500 cc Prime Mover

EASY TO GET AROUND


cartrailer1a1a
The new Hyper PRO Racer Trailer, hooked up to a 1500cc prime mover.
Trailer weight 225 kilos (including ramps and spare wheel). PRO Racer 175 kilos.
Total 400 kilos.

trailerunload
Trailer base 2300 long x 1400 wide. Total length - coupling to rear - 3000 mm.

hypertrailer
Ramps, rear legs, wheel chocks and spare wheel included.

transportwheels
Transport wheels are also available.

trailerjack
The trailer has a built in lift platform. It is visible in the photo above under the seat.
When the PRO Racer is on the trailer, it can be raised 100mm clear of the trailer for general maintenance.

trailer64
With transport wheels fitted, the PRO Racer fits into a standard 6 x 4 garden trailer.
Width of PRO Racer with transport wheels is 1225mm.
(The front is the widest dimension. 1225 to the ends of the threaded axles or 1155 rim to rim).
Depending on how you load it, the PRO Racer hangs out the front or rear of the 6x4 trailer 500mm.

COMING SOON

PICTURE OF THE PRO RACER ON 6 x 4 TRAILER WITH HYPER JACKING PLATFORM
A standard 8 x 4 garden trailer with Hypers detachable ramps, runners and built in lift platform.
This attachment can be quickly removed to revert you trailer to its standard trailer specification.

hypervan
With transport wheels fitted, the PRO Racer fits into the back of a
Toyota HiAce, Mercedes-Benz Vito or Hyundai iLoad or any other equivalent size van.
 


In pursuit of our goal of WASH 'N' RACE motor sport,
a typical race weekend would go like this if you are using our purpose built trailer:

Tow the PRO Racer to the track on the trailer.
Unhook the trailer and position the trailer in your pit bay with the ramps at the door entry.
Extend rear trailer legs and chock wheels.
Drive the PRO Racer down the ramps and out onto the track.
RACE.
Return to pits and drive up onto trailer.
Raise PRO Racer with lift platform.
Change or rotate wheels if required and lube chain.
Lower lift platform and roll PRO Racer backwards off trailer.
RACE FINAL.
Push PRO Racer backwards onto trailer.
Hook-up and drive home.
Degrease and wash while on trailer.
Raise PRO Racer with lift platform.
Perform maintenance work while PRO Racer is on trailer.
Store PRO Racer on trailer until next race.

The PRO Racer can live on the trailer between race days. No unloading on a Sunday night.
At 3 m long and 1.4 m wide, the PRO Racer trailer fits into a 3 x 6m garage space, with room to work on all sides of the car.
Due to the PRO Racer Trailers small size and low weight, it may not have to be registered in some states/countries.
(No registration required in Victoria, Australia)
 

DOWNLOAD a FREE eBook version of the Hyper PRO Racer coffee table book.
Copyright © 2012

logogrey1a
Site Map

item8 item7 item6 item5 item9 LINKS